FEP Single Insulated Litz Wire

Product Information

Size Range:

Sizes listed are a small sample of the litz products offered.Contact the Sales Department for additional constructions.

Conductor:

Nema MW 79c

Nema MW 80c

Insulation:

FEP

Rating:

Temperature:155°C

Voltage: 600V

Applications:

High frequency applications

See litz wire introduction page

Compliances:

UL OBJT2 File No. E206198

UL 60950-1(Ed.2), Annex U

System approvals: UL 1446

RXT-2 Class F

Other systems available upon request

RoHS Compliant

Tensile Strength: 3000 psi

Breakdown: Please request specification sheet

FEP is a Fluoropolymer compound with exceptional dielectric properties, heat resistance, chemical resistance, and flexibility. Commonly used in winding wires, UL AWM wires, and cable jacketing.

Insulated Wire Information:

Part Number	Equiv. AWG	Core O.D. (in)	Circular Mils.	No. Strands	AWG of Strands	Nominal O.D. (in)	Suggested Operating Frequency
SXXL825/44FX-3(MWXX)	11	0.0844	3300	825	44	0.0904	400 - 850 khz
SXXL120/38FX-2(MWXX)	15	0.0567	1920	120	38	0.0607	50 - 100 khz
SXXL120/38FX-3(MWXX)	15	0.0567	1920	120	38	0.0627	50 - 100 khz
SXXL550/44FX-2(MWXX)	13	0.0689	2200	550	44	0.0729	400 - 850 khz
SXXL550/44FX-3(MWXX)	13	0.0689	2200	550	44	0.0749	400 - 850 khz
SXXL100/38FX-2(MWXX)	16	0.0518	1600	100	38	0.0558	50 - 100 khz
SXXL100/38FX-3(MWXX)	16	0.0518	1600	100	38	0.0578	50 - 100 khz
SXXL07/28FX-2(MWXX)	18	0.0413	1110	7	28	0.0453	60 hz - 1 khz
SXXL07/28FX-3(MWXX)	18	0.0413	1110	7	28	0.0473	60 hz - 1 khz
SXXL66/38FX-2(MWXX)	18	0.0420	1056	66	38	0.0460	50 - 100 khz
SXXL66/38FX-3(MWXX)	18	0.0420	1056	66	38	0.0480	50 - 100 khz
SXXL360/44FX-2(MWXX)	15	0.0557	1440	360	44	0.0597	400 - 850 khz
SXXL360/44FX-3(MWXX)	15	0.0557	1440	360	44	0.0617	400 - 850 khz
SXXL20/34FX-2(MWXX)	19	0.0360	794	20	34	0.0400	20 khz
SXXL20/34FX-3(MWXX)	19	0.0360	794	20	34	0.0420	20 khz
SXXL07/30FX-2(MWXX)	20	0.0331	700	7	30	0.0371	1 - 10 khz
SXXL07/30FX-3(MWXX)	20	0.0331	700	7	30	0.0391	1 - 10 khz
SXXL19/36FX-2(MWXX)	21.5	0.0281	475	19	36	0.0321	20 - 50 khz
SXXL19/36FX-3(MWXX)	21.5	0.0281	475	19	36	0.0341	20 - 50 khz
SXXL07/32FX-2(MWXX)	21.5	0.0267	448	7	32	0.0307	10 khz
SXXL07/32FX-3(MWXX)	21.5	0.0267	448	7	32	0.0327	10 khz
SXXL40/40FX-2(MWXX)	22	0.0254	385	40	40	0.0294	100 - 200 khz
SXXL230/44FX-2(MWXX)	17	0.0445	920	230	44	0.0485	400 - 850 khz
SXXL230/44FX-3(MWXX)	17	0.0445	920	230	44	0.0505	400 - 850 khz

PLEASE NOTE: LITZ CONDUCTOR DIAMETERS CAN VARY BY SUPPLIER,PLEASE REQUEST A SPECIFICATION SHEET TO ENSURE THE DIAMETER WILL MEET YOUR APPLICATION REQUIREMENT(S)

Due to fluctuations inherent in litz wire construction,all sizes are approximate.

Please advise our Sales Department of any special requirements or tolerances.