Hot Quickcoder D-series
The Kortho Hot Quickcoder D-series provides instantly drying, sharp, clear and well-covering print results on porous and non-porous surfaces.
From packaging foil and paper to glasses or plastic bottles. From cans to cardboard and very many other materials. Plug in a new Hotroll and the Kortho Hot Quickcoder is ready for thousands of new print actions. And thanks to the integrated pre-heating the next Hotroll is immediately ready for use. The printing colour is simple to change by plugging a Hotroll of a different colour into the Hot Quickcoder.

The Kortho Hot Quickcoder: the highlights

Clean and maintenance-free
Simple to operate
Meets may industrial demands
Long lifespan
Printing possible from any angle required
A dry and sharp print result immediately
Print results with good covering power
Printing on packaging foil, paper, glass, plastic bottles, tins,cardboard and many other materials.

The Kortho Hot Quickcoder: in a nutshell

The Kortho Hot Quickcoder is clean and maintenance-free is use and is simple to operate.
The Hot Quickcoder is made of corrosion-resistant materials and meets many of the industrial requirements (including EN 60204). A guarantee for economic functioning and a long lifespan. Regardless of whether the printing must be from above, from underneath, from the side or slanting, the standard support makes mounting of the Hot Quickcoder possible at any desired angle.

Specifications

Fixed text or separate characters can easily be placed on the special text holder. This text holder can be exchanged in a few seconds; Separate rubber characters are in stock as standard, in varying dimensions and heights. Kortho`s design department can quickly make a customer-specific design according to specifications.

Maximum printing area (mm)
10 x 20 or 10 x 24 mm

Maximum coding speed (prints/min)
250

Maximum production speed (metres/min)
60

Power supply voltage
115/230VAC ± 10% 50-60 Hz

Air supply
5 - 8 bar (clean, dry, oil-free)

Power connection (Watts)
150 (230v) / 100(115v)

Operating pressure (bar)
4 (56 PSI)

Air usage (max litres per operation)
0,04 at 4 bar

Sound level (dB)
82

Kortho Hotroll standard
Non-toxic
black, blue, red, green, white, yellow, brown, orange

Industrial norms
CE-approved
Coding unit main dimensions (mm)
H 218 - W 96,5 - D 124
Including hotrolls and cable
H 255 - W 163 - D 124

 Operating system main dimensions (mm)
(Control Box)
H 223 - W 296 - D 89
Including cable connectors and cable
H 345 - W 296 - D 89

Total weight of coding unit/operating system (kg)
2 / 2,3

Operating system
Kortho Hot Quickcoder D-Series LCD cabinet

Adjustments
8 independent parametersets with settings for the next parameters:
- Print delay
- Print temperature
- Print time

General parameters
- LCD contrast
- Temperature bandwidth
- Extended busy signal
- Ready temperature
- Power on-mode

Input signals
- Printsignal
(NPN, PNP, potential free contact, voltage pulse 5-30VDC/AC)
- Inhibit

Output signals
- Busy
- Alarm
- Power on

Because of the continuos innovation of our products it is possible that changes can be made without notice.
Contact us