Mtl Dsg Mark Dsg Coat Type ANSI Temp Class ℃ BC OC BOND xUEW180 (&) (a) (1) Polyurethane — — MW82 180 xUEW155 (&) (a) (1) Polyurethane — — MW79 155〔#〕 xUEW or UEW130 (&) (a) (1) Polyurethane — — MW75 130〔#〕 xUEW-Y180 (&)( a) (1) Polyurethane Polyamide — MW83 180 xUEW-Y155 (&)( a) (1) Polyurethane Polyamide — MW80 155〔#〕 xUEW-Y130 (&) (a) (1) Polyurethane Polyamide — MW28 130〔#〕 xFEIW or SEIW180 (&) (a) (1) Polyamide — — MW77 180〔#〕 xPSFW or SPEW155 (&) (a) (1) Polyamide — — MW26 155〔#〕 xPEW/130 (&) (a) (1) Polyamide — — 130〔#〕 xSBUEW 180 (&)(a) (1) Polyurethane — Polyamide 180 xSBUEW 155 (&) (a) (1) Polyurethane — Polyamide MW131 155 xSBUEW 130 (&) (a) (1) Polyurethane — Polyamide MW130 130 xSBUEW 120 (&) (a) (1) Polyurethane — Polyamide 120 xEIW 200 (&)(a) (1) Polyester-imide — — MW74-C 200 xEIW 180 (&)(a) (1) Polyester-imide — — MW30-C 180〔#〕 xEI/AIW 220 (&)(a) (1) Polyester-imide Polyamide-imide — MW37-C 220 xEI/AIW 200 (&)(a) (1) Polyester-imide Polyamide-imide — MW35-C, MW73-C, MW36-C 200〔#〕 xAIW 220 (&)(a) (1) Polyamide-imide — — MW81-C 220 xAIW 200 (&)(a) (1) Polyamide-imide — — 200〔#〕 xPIW 240 (&)(a) (1) Polyimide — — MW16-C 240 xPIW 220 (&)(a) (1) Polyimide — —   220〔#〕

 

(&) May have a suffix / rectangular size / to denote the wire is also suitable for rectangular magnet wire.
x May be prefixed by 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 to indicate coating thickness.
(a) – May be prefixed by LZ, LZL, USTC, UDTC, EL(BL), USAC, UDATC, UDHTC, pUSHTC, ML, EW.
Whareas :

LZ – Signifies magnet wires twisted together;

LZL – Signifies base coated magnet wire twisted together aand covered with top coat overall;

USTC – Include single layer polyester filament yarn covering;

UDTC – Include double layer polyester filament yarn covering ;

EL(BL) – signifies base coated magnet wire laid parallel with top coat applied overall.

USAC – Include one layer bondable filber cover.

UDATC – Include one layer of normal fiber cover and another bondable fiber cover.

UDHTC – Include one layer of normal fiber cover and another bondable fiber cover by hot air.

pUSHTC – Include pre-bonded heat bonding litz wire.

ML – Include litz wire with Mylar cover.

EL – Include litz wire with extruded PA jacket.
+ ANSI type applies to round magnet wires.
〔#〕This magnet wire may perform better than rating reflects and hence may not be suitable for an insulation system thermal aging program.
*may be suffixed by 0, 1, 2, 3 to indicate coating thickness.