MODEL JV200

TOROIDAL WINDING MACHINE WITH CHOICE OF 2 PRESENT OR MICROPROCESSOR CONTROL

Principal and optional features

  • Quick change heads for winding and taping (5 minute change-over)
  • Choice of two interchangeable core rotators
  • Separate control console unit, housing complete machine controls for both winding and taping – readily adjustable for operator convenience
  • Variable speed control with footswitch stop and start- bypass option
  • Choice of standard dual preset electronic counter or 99 level microprocessor count control for multi-preset capability
  • Vernier dial core rotation speed control (pitch) – may be changed with machine running
  • Core rotators with individual adjustment of two drive rollers by means of worm and gear assembly – quick core removal and insertion by means of lever
  • Core rotation direction reversed automatically or by push button switches on control console
  • Automatic core index via push button
  • Wide selection of magazines available for all heads

Specifications/Capabilities

Maximum Wire Size: #8 AWG (3.25 mm)
Minimum Wire Size: #38 AWG (0.1 mm)
Maximum Coil O.D.: 10.0" (254.0 mm)
Minimum Coil O.D.: 1.5" (38.0 mm)
Minimum Coil I.D.: 0.500" (12.7 mm)
Maximum Coil Height: 3.5" (88.9 mm)
Winding Speeds: Variable to 1000 TPM
Wire Spacing: Automatic variable
Segment Winding: Automatic reversal of core
Progressive Winding: Automatic with microprocessor
Deceleration Control: Automatic with microprocessor
Acceleration Control: Automatic with microprocessor
Motor: 1/2 HP – 1725 RPM-DC
Power Requirement: 110 -120 V, 50-60 cycles (220 V optional)
Crated Dimensions: 37" x 37" x 42" (94 x 94 x 107 cm)
Crated Weight: 300 lbs (136 kg)
Contact us