FCM COMPOSITE

FCM COMPOSITE PHOTO

    FLEXIBLE COMPOSITE MATERIAL

     Laminates (DMD, NMN, N/Pen/N etc.) Composites of film, fibre, wovens, non-wovens, foils, and other homogeneous materials can be combined together to obtain desired electrical and mechanical properties at competitive prices. Laminates are available in temperature classes ranging from 105 C through 220 C. Typical combinations include 2 & 3 ply laminates of Rag-Polyester, Kraft-Polyester, Dacron-Polyester, Nomex ®-Polyester, Nomex ®-Kaladex ® and Nomex ®-Kapton ®. Some typical applications for laminates include motor and transformer insulations and other electrical and electronic insulation applications.


    2-PLY COMPOSITES

  1. Mylar/Kraft paper (105 C) TK****
  2. Mylar/Press Board paper (105 C) TP****
  3. Mylar/Fish Paper (120 C)
  4. Mylar/Presspan (130 C)
  5. Mylar/Dacron (155 C)
  6. Mylar/Nomex paper N/M (180 C)
  7. Pen/Nomex paper etc (180 C)

    3-PLY COMPOSITES

  8. Rag paper/Mylar/Rag paper RMR (105 C)
  9. Mylar/Fish paper/Mylar (120 C)
  10. Mylar/Presspan/Mylar (130 C)
  11. Dacron/Mylar/Dacron DMD (155 C)
  12. Nomex/Mylar/Nomex NMN, NMN-E, NTN (180 C)
  13. Nomex/Pen/Nomex N/Pen/N, N/P/N (180 C)
  14. Nomex/Kapton/Nomex NKN (220 C)

    Suitable for:

  15. Slot Liner
  16. Ground Insulation
  17. Wedges
  18. Barrier
  19. Phase Insulation
  20. Layer

    Other types combination can be made upon request.

  Back to Main Page

If you have questions or comments, contact us at market@pleo.com

® is P. Leo & Co., Ltd. registered trade mark.

Mylar, Nomex, Kapton, Kaladex ® is Du Pont's registered trade mark.

© P. LEO 1996-1999